HILLBRICK RACING FRAMES
Builder Profile
About us:
When buying a
frame you only get what you pay for. A Hillbrick Racing Frame does not include
shortcuts. Hillbrick Racing Frames use only the highest quality frame tubes and
fittings to give a frame that stands out.
Why Invest in a Hillbrick Racing Frame?
- Handbuilt
- You don't have to compromise - you can have what you want.
- Your frame is Made-to-Measure.
- Made in Australia.
- Built from the best suited tubeset for your application and riding styles.
- Hand and machine mitred joints.
- Low temperature, sequential brazing technique to ensure that the tube retains as much strength after heating as possible,
helping to give the frame stiffness.
- Frames can be TIG welded.
- Alloy frames undergo a specially controlled two-stage artificial ageing process.
- All joints are polished (where applicable).
- Jig built for accuracy.
- All fittings are properly finished.
- Surface table alignment for precision and straightness.
- Two-pack, low-bake paint for durability and high gloss.
Products and services available utilizing BTCs.
We sell frames and complete bicycles.
Standard frames
- Road Racing
- Track
- Midget (Childrens) Racing
Custom frames
- Road Racing
- Track
- Midget (Childrens) Racing
Retrofitting services
- On all frames manufactured by any manufacturer
Construction methods
- Lugged
- TIG welded
- Fillet brazed
Frame materials
Purchase from
- We sell through retailers but will sell direct in areas where
we aren't represented.
Contact Information:
Hillbrick Racing Frames
Factory Address: Unit 7, 25-31 Airds Road,
Minto NSW 2566 Australia
Postal Address: 37 Stornoway Avenue,
St. Andrews NSW 2566 Australia
Phone: (02) 9820 4011
Fax:: (02) 9820 4018
Mobile: 0412 842 730
e-mail: paul@hillbrick.com.au
HILLBRICK
RACING FRAMES Home Page
Return to builders list
Framebuilder list |
Cases |
Packing |
Photos |
Reviews |
Comments |
Retailer list |
Installation |
Specifications |
Cost |
Retrofit or new? |
Travel adventures
Contact Information
S and S Machine's Home Page